1.0 Configuration and Calibration
The ISI-99 Indicator can be configured using a series of menus through the indicator
front panel when the indicator in setup mode.
1.1 Enter Configuration and Calibration
Method 1: Hold “PRINT” key when press “ON/OFF” key to turn on indicator. Display
shows “PW0000”, then using front panel key edit display showing “PW0099” when
press “ENTER” key.
Method 2: Open back cover of indicator, then press “K1” located bottom right side of
PCB board.
1.2 Exit Configuration and Calibration
When span calibration is done, indicator is returned to weigh mode automatically. On
the other way, the “ “is pressed at “CONFIG” menu.
1.3 Menu Structures and Parameter Descriptions
1.3.1 Key Functions In Setup Mode
ON/OFF
ZERO
TARE
UNITS
SET
ENTER
Move UP/
ENTER Value
Move LEFT/
Increment Value
Next
Move DOWN/
Move RIGHT/
Decrement Value
Previous
Note: To select parameter, use “
” or “
” key
２
