iSHAN YGL-L, Operation Manual

Page: 12 / 17

12 / 17
3 Specification
、
Model and Technical Requirements
4 Preparation Before Use
4.1 The User Do The Assembly As Per The Following Steps(see figure 2)
a As per the packing list to check whether the parts are complete.
b Insert the manual grease handle into the movable plate and the connec
ting rod pin align the two pin holes, insert the axle pins and load the
E shape cramp ring in turn.
c Inject the right amount of thin oil into each part of the movement try
to pull the manual grease handle should feel flexible.
d When loading the high pressure rubber hose need to install o ring/seal
ring 6.8X1.9 which is between the oil outlel connector and quick ins
ert connector Have already sealed into plastic bag.( see figure 2).
e When loading the outer braided steel wire hose, set the sleeve cap
、
sle
eve into it in order then screw the outer braided steel wire hose into t
he straight connector tighten it.( see figure 2)
4.2 The Use of Quick Connector
When inserting the quick connector see figure 3, press the outer sleeve of
the quick connector release to reset.
Specificificat
Model
Item
YGL-L10SF YGL-L10SH
Nominal Displacement 10 ml/cyc 10 ml/cyc
Nominal Pressure 4.0 MPa 4.0 MPa
Piping form
Outer braided steel wire h
ose matches quick couplin
g/connector
（
1.5meter Ø6
）
High pressure rubber hos
e matches quick couplin
g/connector
（
1.5meter
）
Use Medium

000
～
1# Lithium Grease