IS9100
—
MDC
5
ISEO
2. Preparation of operator at passive leaf
Put the operator onto the ground or a table to prepare it.
Disconnect the flat ribbon cable on user interface side
Insert the coupling piece for the passive leaf onto bar
« A »
and guide
« B » inside the system girder.
Turn the coupling piece while fitting it inside the system
girder ; then put it into the provided opening at the system
girder
« A ».
Remove the PCB with the internal program switches from
both operators.
First remove the connection cable
➀
, then move the PCB
upwards and pull it out
②
.
Slip the rod for the passive leaf from the face side onto the
guide inside the system girder.
A
B
10
11
12
1
2
13
14
Summary of Contents for MDC IS9100
Page 1: ...Mounting instructions IS9100 MDC ...
Page 15: ...Notice de pose IS9100 MDC ...
