Important safety instructions
DANGER!
DANGER!
Before operations at the load or the high voltage output of the power supply are started, the device has to be
switched off, the discharge of residual voltage has to be finished and the high voltage output of the power
supply must be properly grounded. Depending on application residual voltages can be present for long time
periods. These residual voltages can lead to severe injuries.
WARNING!
WARNING!
Before connecting or disconnecting HV cables or any operation on the HV output or the application, the unit has
to be switched off and discharge of residual voltage has to be finished. Depending on application residual
voltages can be present for long time periods.
WARNING!
WARNING!
To avoid injury of users it is not allowed to open the unit. There are no parts which can be maintained by users
inside of the unit. Opening the unit will void the warranty.
WARNING!
WARNING!
Do not operate the unit in wet or damp conditions.
WARNING!
WARNING!
Do not operate the unit in an explosive atmosphere.
WARNING!
WARNING!
Do not operate the unit if you suspect the unit or the connected equipment to be damaged.
THQ Systems - CONFIGURABLE AC/DC LABORATORY HV SUPPLY | Last modified on: 2022-04-21 | www.iseg-hv.com
5/41
