IGEP
TM
RADAR SENSOR ORION Hardware Reference Manual
ISEE 2007
S.L. All rights reserved, IGEP™ is a registered trademark from ISEE 2007 S.L. The following is provided for informational purposes only.
DOCUMENT FROM ISEE 2007 S.L. Ref: MAN-PR-RADR0010-RA1-001
27
7
IGEP
™
RADAR SENSOR ORION SPECIFICATIONS
7.1
MECHANICAL SPECIFICATIONS
Figure 13 : IGEP
™
RADAR SENSOR ORION Top & side views Mechanical dimensions [mm]
ALL DIMENSIONS ARE IN [mm]
Radar board has been designed in order that is mechanically fully compatible with ISEE IGEP
™
v2 Board and ISEE IGEP
™
COM MODULE.
The perimeter dimensions of the IGEP
™
RADAR SENSOR ORION Board are almost the same as
the IGEP
™
v2 Board (93x64mm) and the drill holes on the corners are perfectly aligned in order
they can be mechanically fixed with separators (10mm pcb separation) and M3 screws.
The expansion connector JC2 is also perfectly aligned with the corresponding J990 connector
of the IGEP
™
v2 Processor Board in order they can be connected altogether. This gives also
mechanical stability to the ensemble.
IGEP
™
COM MODULE is also mechanically compatible with IGEP
™
RADAR SENSOR ORION Board.
They can be assembled altogether and hold into a box, thus having a complete stand alone
radar module solution.
