IGEP
TM
RADAR SENSOR ORION Hardware Reference Manual
ISEE 2007
S.L. All rights reserved, IGEP™ is a registered trademark from ISEE 2007 S.L. The following is provided for informational purposes only.
DOCUMENT FROM ISEE 2007 S.L. Ref: MAN-PR-RADR0010-RA1-001
24
PIN
NAME
MODE 0
MAX
FUNCTION
1
PW
VBAT
VBAT
+4,2V
POWER VOLTAGE IGEP
™
COM MODULE IN
2
PW
VBAT
VBAT
+4,2V
POWER VOLTAGE IGEP
™
COM MODULE IN
3
PW
GND
GND
0V
GROUND SIGNAL
27
DIG
3DDS CSB
(L)
mcspi1_cs1
+1,9V
DDS CS
(SPI1 CS0)
IN
(1)
33
PW
GND
GND
0V
GROUND SIGNAL
43
DIG
DDS CKB
(L)
mcspi1_clk
+1,9V
ADC&DDS CLOCK
(SPI1 CLK)
IN
(1)
44
DIG
3DDS DATB
(L)
mcspi1_simo
+1,9V
DDS DATA IN
(SPI1 SIMO)
(1)
Table 22 : IGEP
™
RADAR SENSOR ORION JC4 (KYOCERA P/N: 24-5602-070-001-829)
Function names marked with
gray shading
denote that are available only on demand.
NOTE: PINS NOT DESCRIBED ARE NOT CONNECTED
JC3 and JC4 are 35x2 PIN KYOCERA ELCO P/N: 24-5602-070-001-829
IGEP
™
RADAR SENSOR ORION Board can be used with other processor-control boards if
electrical specifications and functionalities are strictly respected.
Some pins can be used to input and/or output analog and/or digital signals, but precautions
must be carefully taken to do not damage the corresponding ports of OMAP microprocessor.
Contact for more information.
