IGEP
TM
NEW YORK
Hardware Reference Manual
ISEE 2007
S.L. All rights reserved, IGEP™
is a registered trademar k from ISEE 2007 S.L. The followi ng is provided for informational purpos es onl y.
DOCUMENT FROM ISEE 2007 S.L. Ref: MAN-PR-ILMS0015-RAx
12
Figure 4 On Board Accelerometer
Main features of this device:
Supply and IOs voltage: 1,8V
Ultra low power consumption (down to 2 µA)
±2
g
/±4
g
/±8
g
/±16
g
dynamically selectable full-scale
16bit data output
6D/4D orientation detection
Free-fall detection
Motion detection
Embedded Temperature sensor
With this feature you will be able to extend even more the wide range of applications of either
IGEP
™
COM MODULE, IGEP
™
COM NEUTRON or IGEP
™
COM PROTON.
6
EXPANSION CONNECTORS INTERFACES
IGEP
™
NEW YORK has 2 connectors of 70-pin (AVX 5602 series), J10 and J40, that match with J1
and J4 expansion connectors of IGEP
™
COM MODULE, IGEP
™
COM NEUTRON or IGEP
™
COM
PROTON.
J10 and J40, with up to 50 connections at 1.8V CMOS, support lots of features provided by
IGEP
™
COM MODULE, IGEP
™
COM NEUTRON or IGEP
™
COM PROTON that integrate OMAP3xxx
CPU that can be used in your custom baseboard.
IGEP
™
NEW YORK also has 2 additional connectors of 25-pin with an easy to interface pitch of
2.54mm in order to access several features of IGEP
™
COM MODULE, IGEP
™
COM NEUTRON or
IGEP
™
COM PROTON with an easy interface.
