IGEP
TM
NEW YORK
Hardware Reference Manual
ISEE 2007
S.L. All rights reserved, IGEP™
is a registered trademar k from ISEE 2007 S.L. The followi ng is provided for informational purpos es onl y.
DOCUMENT FROM ISEE 2007 S.L. Ref: MAN-PR-ILMS0015-RAx
11
Signal Name
Pin #
Description
gpt10_pwm_evt
J21:09, J10:55
PWM output port GPTimer-10
gpt8_pwm_evt
J21:10, J10:16
PWM output port GPTimer-8
gpt9_pwm_evt
J21:11, J10:18
PWM output port GPTimer-9
gpt11_pwm_evt
J21:12, J10:21
PWM output port GPTimer-11
Table 8 PWM interfaces on J21 connector
I2C PORTS ARE 1.8V LOGIC LEVELS. ENSURE YOU CONNECT DEVICES
COMPATIBLE WITH THESE LEVELS.
PERMANENT DAMAGE
WILL OCCUR IF
HIGHER VOLTAGE IS APPLIED
5.8
DSS
IGEP
™
NEW YORK assembled with IGEP
™
COM MODULE, IGEP
™
COM NEUTRON or IGEP
™
COM
PROTON will give you an easy, quick and fast way to access DSS (Display Sub-System) interface
through easily accessible 2.54mm pitch J21 connection by configuring the appropriate pins in
MODE-0. Please check Expansion for Processor Board section for a complete pin description
and their possible modes.
I2C PORTS ARE 1.8V LOGIC LEVELS. ENSURE YOU CONNECT DEVICES
COMPATIBLE WITH THESE LEVELS.
PERMANENT DAMAGE
WILL OCCUR IF
HIGHER VOLTAGE IS APPLIED
5.9
3-AXIS ACCELEROMETER
IGEP
™
NEW YORK includes an on board 3-axis accelerometer accessible through SPI-1 available
on JC21 (check section SPI above) and J40 connector interfaces.
This device is ST part number LIS3DH, and consists on a MEMS digital output motion sensor
ultra low-power high performance 3-
axes “nano” accelerometer
.
