ISE SY-1001, User Manual

Page: 25 / 84

7
(2) START/STOP
Power on the machine, press it to start running. When running, press it to stop and
record the running.
(3)
SPEED +
When running, press it to increase speed. Hold on it, speed is increased
continuously.
(4)
SPEED –
When running, press it to decrease speed. Hold on it, speed is deceased
continuously.
3.2 Getting Started
Power the treadmill on by plugging it into an appropriate wall outlet, then turn on
the power switch located at the front of the treadmill below the motor shield.
Ensure that the
safety key is installed, as the treadmill will not power on without it.
When the power is turned on, the display is ready for operation.
4. MAINTENANCE
Reasonable cleaning/lubricating should be made to extend the life time of this unit.
Performance is maximized when the belt and mat are kept as clean as possible.
WARNING: THE MAT/DECK FRICTION MAY PLAY A MAJOR ROLE IN THE
FUNCTION AND LIFE OF YOUR TREADMILL AND THAT IS WHY WE
RECOMMEND YOU CONSTANTLY LUBRICATE THIS FRICTION POINT TO