ISC SBV 3200, Operating Instructions Manual

Page: 9 / 18

7
GB
Layout (Fig. 1)
1. Rear Handle
2. Throttle Trigger
3. Throttle Lock
4. On/Off Switch
5. Front Handle
6. Muffler Cover (Exhaust)
7. Fuel Tank Window
8. Fuel Cap
9. Starter Handle
10. Air Filter Cover
11. Vacuum/Blower Tube
12. Choke Lever
13. Spark Plug Wire / Spark Plug
14. Vacuum/Blower Slide
15. Primer Bulb
16. Harness
17. Vacuum Bag
18. Speed Cleaner Head
2. Technical data
Engine 24 cm 3
Max. Air Velocity ca. 145 km/h
Max. Air Volume 236 m
3
/h
Max. Engine Speed 7.800 ± 500 min -1
Collection Bag 55 Litre
Mulching Ratio 10:1
Fuel Capacity 650 ml
Weight 6.4 kg
Maximum Enquine Performance 0.8 kW
Sound power level 108 dB(A)
Sound pressure level at ear 95 dB(A)
Vibration 13.69 m/s 2
3. BLOWER ATTACHMENT ASSEMBLY
INSTRUCTIONS
1. Release the screws (A) and remove the screw
(B). Insert blower tube (C) into the blower
housing and replace screw (B). Tighten screws
(A). (Fig. 1A)
2. Insert speed cleaner head (D) to the tube (C).
(Fig. 1B)
앬 HARNESS INSTALLATION
Attach the 2 harness clips to the 2 links in the
blower handle. (Fig. 2)
앬 VACUUM ATTACHMENT ASSEMBLY
INSTRUCTIONS
To install vacuum bag:
Pull the slide (A) forward and fit bag (B) into the
vacuum housing. (See Fig. 3)
NOTICE: Vacuum bag installation
The vacuum bag connection tube MUST be scurely
and correctly fitted to the vacuum housing (see fig. 3
of the instructions) prior to the operation. To ensure
the tube is in place correctly, first line up with the
indentations either side of the opening. Push the
connector into place and turn to the right until a click
is heard and the unit locks securely.
This is a safety feature and if the connector is not in
place the blower vac will not start.
The vacuum bag can now be fitted over the open end
of the connection tube and secured with the velcro
strap.
FUEL AND LUBRICATION
앬 FUEL
Use regular grade unleaded gasoline mixed with
40:1 custom 2-stroke engine oil for best results.
WARNING : Never use straight gasoline in your unit.
This will cause permanent engine damage and void
the manufacturer’s warranty for that product. Never
use a fuel mixture that has been stored for over 90
days.
WARNING: Use only Class I 2-stroke oil suitable for
air-cooled engines.
앬 MIXING FUEL
Mix the fuel with 2-stroke oil in a suitable
container. Shake the container to ensure that it is
properly mixed.
앬 FUEL AND LUBRICATION
Gasoline and
Oil Mix 40:1
Anleitung SBV 3200 26.07.2006 10:43 Uhr Seite 7