background image

 

 

5

DW100.2: Issue A - Aug 2017

Deadweight

[A] General Limitations

1.  The Deadweight Trolley should not be used on a surface that slopes more than 5

o

.

2.  The Deadweight Trolley must be used so that the operator is in line with the equipment’s direction 

to prevent the possibility of a pendulum occuring in the event of a fall

3.  Ensure that the strength of the structure is adequate

4.  The Deadweight Trolley should not be used on frozen surfaces. The presence of ice may cause 

the unit to slip

5.  The Deadweight Trolley is for use by a single person. In the event of a rescue being required, the 

Deadweight Trolley can be used with a 2 person load in accordance with PD CEN/TS 16415: 2013

6.  Do not use Deadweight Trolley outside of its limitations as outlined in this manual

7.  The user shall be equipped with means of limiting the maximum dynamic forces exerted on the 

user during a dynamic event to less than 6kN

8.  If the intention is to combine PFPE for Fall Arrest with Deadweight Anchors the user should seek 

guidance from the manufacturer as to its suitability. Always ensure that all components within a safety 

system are compatible and allow the system to function safely 

1

2

B Specific Use

Summary of Contents for DW100.2

















Reviews: