21
ISETTA
USE AND MAINTENANCE MANUAL
428000372
237
EN
8.2 Access condensing unit
BACK
a
) Remove the fi xing screws of the protective grille.
b
) Remove the protective grille.
8.3 Cleaning condensing unit
FRONT
a
) Remove the fi xing screws of the
protective carter.
b
) Remove the protective carter.
a
b
a
b
Attention
Clean the condensing unit with a vacuum brush.
Clean the
CONDENSER
using a relevant brush with soft bristles; carry out the operation, paying attention
not to bend the condenser foils.
c
8.4 External cleaning operations
The external surfaces must be cleaned as described below:
STAINLESS STEEL
Use only lukewarm water and non-aggressive detergents, then rinse
and dry with a soft cloth.
ACRYLIC OR POLYCARBONATE SURFACES
Wash with lukewarm water, using a soft cloth or a chamois cloth.
Do not use detergents, alcohol, acetone and solvents.
Do not use abrasive cloths or sponges.
GLASS SURFACES
Only use products specifi cally designed for cleaning glass.
We do not recommend using tap water, which may leave calcium deposits on the surface of the glass.
Summary of Contents for Isetta 12R LX
Page 32: ......