Doc. CEI12166
Rev. 1
Pag. 18 Of 47
. Two recordings selection. In this mode, the measurement is performed in two steps, separated by a
pause: this avoids losing the timing resolution. It is possible to program a first recording duration, then
a dead time, then the second recording duration. In this mode, coil currents and the analog input are not
monitored. If the box is checked, the selection window changes as follows.
The following diagram explains timing definitions: it allows testing the action of the “pole
discrepancy” protection.
OPEN 1
OPEN 1
CONTACT 1
CONTACTS 2, 3
D 1
PAUSE
D 2
