iSG4F
User’s Manual
iS5 Communications Inc.
47
- remove condition
{ sfp_eth9| sfp_eth10| temperature| cpu-usage| l2vpn|
system-power }
- read interface
{ alarm| d-out1| d-out2}
- set interface
{
alarm| d-out1| d-out2}
state
{
set| clear}
+ update condition
{ sfp_eth9| sfp_eth10| temperature| cpu-usage| l2vpn|
system-power }
- interface
{ alarm| d-out1| d-out2}
- show
{
admin-status| alarming_conditions| conditions| settings}
11.6
Commands Description
Command
Description
config
application
connect
Entering the ACE mode
alarm-relay
Entering the alarm relay mode
add | update
condition
: set the trigger condition for the alarm.
l2vpn – failure at the l2 VPN will trigger a relay
change.
ETH2 – status down for this port will trigger a relay
change.
system-power - Alarm set while in BOOT, and when the
S/W performs reset.
interface :
set the target relay interface for the
condition
Alarm – the “ALARM” relay interface.
admin-status
Enable | disable of all relay interfaces condition
to alarms
Default : disabled
remove condition Remove the assignment of trigger conditions
l2vp