iS5 iMX350, Quick Start Manual, Page: 31 / 40

27
C
HAPTER
12 W
EB
I
NTERFACE
: IP A
DDRESS AND
D
EFAULT
R
OUTES
6. Configure the IP routes.
F
OR EXAMPLE
: For IP Route Configuration, go to
Layer 3 Management > IP > IP Route.IP Route
Configuration
appears.
7. You will need two routes: one route to your network and a default route to your control center.
Once these routes are established, a remote user can configure the switch for proper configuration.
a.
You will need to configure VLAN #1 to use the default gateway. This route may already be in
your list. The destination network should be the network for the IP Address configured in
section 0, the subnet mask, the interface should be “vlan1”, the switch option should be
“default”, and the distance should be “0”. Click
Add.
b. Configure the default gateway. The destination network should be 0.0.0.0, the subnet mask
should be 0.0.0.0, and the gateway should be the gateway router IP address. Consult with
your administrator if you do not know this value. Leave the interface blank. The switch should
be “default” and the distance should be “1”. Click Add.
c. Click Apply
S
TEP
R
ESULT
: You should see a screen similar to the following:
R
ESULT
: