25
C
HAPTER
12
W
EB
I
NTERFACE
: IP A
DDRESS
AND
D
EFAULT
R
OUTES
12. Web Interface: IP Address and Default Routes
This section will explain how to set the IP Address on the RAPTOR and create a default route.
P
REREQUISITE
:
In order to perform the tasks in this section you will have already logged into the RAPTOR via the WebUI.
Speak with your Network Administrator to determine the values of the following parameters:
•
IP Address
•
IP Address Mask
•
Default Route
These values will be needed to configure the RAPTOR.
1.
Configure the VLAN settings by first navigating to the VLAN settings screen.
F
OR
EXAMPLE
:
Go to
Layer 3 Management > IP > VLAN Interface.
S
TEP
R
ESULT
:
The following screen will appear:
2.
Configure the values as follows:
–
Select
—select the VLAN Interface for which configuration needs to be modified or deleted. In
this case it will be VLAN interface #1
–
VLAN Interface
—enter “1”.
–
Switch
—default.