iES12G User’s Manual
iS5 Communications Inc.
86
5.1.12.7
VeriPHY
This page is used for running the VeriPHY Cable Diagnostics.
Press
to run the diagnostics. This will take approximately 5 seconds. If all ports are
selected, this can take approximately 15 seconds. When completed, the page refreshes
automatically, and you can view the cable diagnostics results in the cable status table. Note that
VeriPHY is only accurate for cables of length 7 - 140 meters.
10 and 100 Mbps ports will be linked down while running VeriPHY. Therefore, running
VeriPHY on a 10 or 100 Mbps management port will cause the switch to stop responding until
VeriPHY is complete.
Label
Description
Port
The port where you are requesting VeriPHY Cable Diagnostics.
Cable Status
Port: Port number.
Pair: The status of the cable pair.
Length: The length (in meters) of the cable pair.
System Reboot
You can reset the stack switch on this page. After reset, the system will boot normally as if you
had powered-on the devices
