iES12G User’s Manual
iS5 Communications Inc.
24
Enabled The switch will send out LLDP information, and will analyze
LLDP information received from neighbors.
LLDP Neighbor Information
This page provides a status overview for all LLDP neighbors. The displayed table contains a row for each port on
which an LLDP neighbor is detected. The columns hold the following information:
Label
Description
Local Port
The port on which the LLDP frame was received.
Chassis ID
The Chassis ID is the identification of the neighbor's LLDP frames.
Remote Port ID
The Remote Port ID is the identification of the neighbor port.
System Name
System Name is the name advertised by the neighbor unit.
Port Description
Port Description is the port description advertised by the neighbor unit.
System Capabilities
System Capabilities describes the neighbor unit's capabilities. The possible
capabilities are:
1. Other
2. Repeater
3. Bridge
4. WLAN Access Point
5. Router
6. Telephone
7. DOCSIS cable device
8. Station only
9. Reserved
When a capability is enabled, the capability is followed by (+). If the
capability is disabled, the capability is followed by (-).
Management Address
Management Address is the neighbor unit's address that is used for higher
layer entities to assist the discovery by the network management. This
could for instance hold the neighbor's IP address.
Click to refresh the page immediately.
