GSM модем iRZ TC65 Lite
User Manual
15
The collected statistics if cleared by the command “YES”. Upon an incorrect input, the modem
will display “ERROR” and represent the statistics clearing menu again. Upon successful input or
issue of the command <Q>, you will jump to the main menu.
After input of the command “
M
” the main menu will load again.
Exit from the menu mode occurs after installation of the SIM tray, the modem jumps to the
operation mode.
2.6. Programming Mode
The programming mode is used to change / update the software of the modem microcontroller.
The software is updated via the interface RS232 using the program “
mprog2.exe
”. You can
download the program from the manufacturer’s site.
The software can be updated only for the versions 04 and further. The version variant may be
viewed in the menu mode (refer to the User Manual).
To change the weaving, the sequence of actions is as follows:
1. Start the program “
mprog2.exe
”. The program window will appear (Fig.1).
Fig.1
