IRT-6630-DTR
I.R.T. Communications Pty Ltd | www.irtcommunications.com
Page 20 of 22
Revision 01
channelTx2Present
- An indication of the status of the signal connected to the IN 2 input:
sdi3G PRESENT
sdiHD PRESENT
sdiSD/ASI PRESENT
UNKNOWN PRESENT
NOT PRESENT
channelEnableTable:
A table containing information about the channel state settings.
channel1Enable
-
Not applicable to the IRT-6630-DTR.
channel2Enable
-
Not applicable to the IRT-6630-DTR.
channelTxEnable
- An indication and control of the transmitter IN 1 channel:
(1)
disabled: Disable the transmitter. Neither IN 1 nor IN 2 will be sent. Writing
either a 2, 3, 4 or 5 will enable the channel.
(2)
enabledActive: IN 1 input is enabled and active.
(3)
enabledMuted: IN 1 input is active and muted due to either rate not matching
the set rate or no signal is present at the IN 1 port.
(4)
enabledChangedOver: IN 1 input is active but transmitter has switched to IN 2
input due to either IN 1 rate not matching the set rate or no signal is present at
the IN 1 port.
(5)
na: Not applicable to the IRT-6630-DTR.
channelRxEnable
- An indication and control of the receiver channel:
(1)
disabled: Disable the receiver output. Writing either a 2, 3, 4 or 5 will enable the
output.
(2)
enabledActive: Receiver output is enabled and active.
(3)
enabledMuted: Receiver output is enabled and muted due to either rate not
matching the set rate or no signal is present in the received optical signal.
(4)
enabledChangedOver: Not applicable to the IRT-6630-DTR.
(5)
na: Not applicable to the IRT-6630-DTR.
channelTx2Enable
- An indication of the transmitter IN 2 channel:
(1)
disabled: Input IN 2 is disabled as per the auto change-over setting also being
disabled.
(2)
enabledActive: IN 2 input is enabled and active. An auto change-over operation
has taken place.
(3)
enabledMuted: IN 2 input is active and muted due to the auto change-over being
enabled but IN 1 still has control of the transmitter.
(4)
enabledChangedOver: Not applicable for the IRT-6630-DTR.
(5)
na: Not applicable to the IRT-6630-DTR.
channelAliasTable:
A table containing information about the channel aliases.
channel1Alias
-
Not applicable to the IRT-6630-DTR.
channel2Alias
-
Not applicable to the IRT-6630-DTR.
channelTxAlias
- Set and read the Alias (name) for the transmitter signal IN 1.
channelRxAlias
- Set and read the Alias (name) for the received signal.
channelTx2Alias
- Set and read the Alias (name) for the secondary transmitter signal IN 2.
