Pipe centres left to right =
Drawings
Pipe Centres
1. Unpack & Inspect
This product should have reached you in perfect condition. Please carefully unpack and inspect this radiator and all fittings. Your point of purchase
must be notified of any shortages or damage within 28 days of delivery. For further information please see terms and conditions on reverse
.
www.supplies4heat.co.uk 01342 306880
Cast Iron Radiator with footed end sections
Please read these instructions and terms and conditions carefully prior to installation.
Failure to do so may invalidate the warranty.
SHERWOOD
Fitting Instructions
width of radiator plus valves
CAUTION HEAVY
This radiator is very heavy, and we advise that the radiator is
lifted by two people.
This radiator needs to be carried in an upright position.
Carrying the radiator in a horizontal position may cause
cracks and permanent damage to the radiator which will
invalidate the warranty.
✓
X
L
R
R
L
Tighten ‘L’
Anti Cloclwise
Tighten ‘R’
Cloclwise
Bush Configurations
The Sherwood has specific left and right hand threaded bushes and these can
be easily damaged if forced or incorrectly fitted (this will inevitably cause leaks).
Bushes require a dry fit connection only; you must not use any Compound
materials (e.g. Jet Blue) or Plumbers Hemp.
PTFE tape may be required
depending on the valve tail type (not suitable with BELSAY TRV’s)
, if you
choose you may use up to 4 turns of PTFE tape to help seal the threads (the
tape should be applied in the direction of the thread and no more than this
amount should be used as this may cause leaks to occur).
Pipe centres from skirting board = 72mm
SHER_IR_1.0
Sections = 61mm wide
Sections = 60.5mm wide
750 High
650 High
455 High
142mm
142mm
142mm
