Wiring Details
CONNECTING TO WATERMARK SENSORS
Use waterproof wire connectors.
1.Insert one side of a Node wire pair and one side of the corresponding sensor wire pair into
one connector. Repeat for the other wire in the Node pair and the remaining sensor wire with
another connector. One connector per individual Node wire is needed.
Be sure to
INDIVIDUALLY insulate ALL unused wires. DO NOT leave unused Node wires
un-insulated and allowed to corrode, touch each other or touch the metal pole.
2.Repeat for each sensor being installed.
NOTE: Wires are paired by color. One is a solid color and the other is the
same color with a black stripe.
*
*
After registration on SensMitWeb, notice that the sensor data in the graph view is color coded to the wire
colors on the Nodes. WATERMARK lines are green, blue and gray (for white), the temperature line is red, the
rain event is indicated by yellow vertical bars and irrigation events are brown vertical bars.
9