ADJUSTING THE TIMING OF THE HOSE GUIDE FORK
Check that the hose guide fork is positioned properly: it has to be well aligned with the pe hose when
the pe hose has been completely unrolled. If you need to adjust the guide fork position please do so as
follows:
-
FIRST OF ALL STOP THE MACHINE!!
-
take the snap ring that retains the scroll bar insert off the block (Fig 27 pos 58).
-
take the insert out of the block pulling it out by the grease fitting and note carefully the direction
(position) of the half moon (fig 28 pos 59).
-
Align the guide fork to the polyethylene hose and put the insert inside the block paying attention the
half moon is in the same direction as before.
-
put the snap ring back in its place and ensure it
’
s well positioned all inside the groove.
Page 16
Summary of Contents for SPORT Series
Page 5: ...Page 5...
