84
F
R
A
N
C
A
I
S
E
N
G
L
I
S
H
E
S
P
A
N
O
L
Test during irrigation
Start
LENGTH UNWOUND
= 0177
LENGTH WOUND-UP
= 0142
Start
Start
PROGRAMME 01
Start
FLOW
= 068,4
Start
GUN PRESSURE
= 004,7
Start
APPLICATION
= 0027
Start
DELAYED START
= 00:00
Start
DELAYED ARRIVAL
= 00:42
Start
SPEED
= 054,2
Start
INFO END
01 30 0365 +0038
As soon as the machine has started, by pressing the "START" key you can get on the dis-
play all the information concerning the current session. This information is instantaneous.
So, at any time you can know the pressure at the gun, the remaining time of duration.
We have here the
remaining durations
These values could
change during the
winding
Selected function
Display Indication
To Modify the value
* With mini programme
Nber of programmes : 11
Values for maintenance
The two first two figures values (0130) are given for Irrifrance’s technical department (01 corresponds to
the type of regulation’s speed.; 30 corresponds to the irrigating sequences (see schedules page 81).
IN UNWINDING
:
-
The first four figure number
(ex 0365) correspond to the impulses number read on the winding sensor.
IN WINDING IN
:
-
The first four figure number
(ex 0365) correspond to the impulses number read by the turbine sensor
between 2 impulses read by the winding sensor. This value changes according the type of reel machine
(see diagnosis aids).
-
The second four figure value
correspond to the reel machine’s delay or advance (see diagnosis aids).
This value divided by 256 corresponds to the number of delayed meters or in advance