Irradio RF-42UC, User Manual

Page: 24 / 26

23
-Press “VOL+” or “VOL-” button to raise up/lower the volume level.
-Press “
” button to skip to next track or press “ ” button to the
previous track.
-Press and hold “
” or “ ” button to search during the desired
music.
-Press “RPT/MEM” button to access to the Repeat-1, Repeat Folder,
Repeat All play mode.
- To remove your USB device or SD/MMC card, simply stop the
playback and gently unplug it from the connector.
AUX-IN (LINE IN) OPERATION
If you are using an iPod or other MP3/digital audio player which can not
be plugged in this unit directly, you can still play it on the unit via an
audio connecting cable.
1.Plug one end of the 3.5mm audio cable (excluded) into the
headphone or line out jack on your player, plug the other end of cable
into the unit AUX-IN jack of the unit.
2. Turn on the external audio source and play you device.
3. Slide the Power ON/OFF switch to ON position to turn on the
unit.
4. Press MODE button until “AUX” icon appears on the display.
5. The volume level can now be controlled through the main unit.
Operate all other functions on the external device as usual.
Notes:
(1) If you're connected to the Line out Jack of your external device, then
you only need to adjust the volume control of this unit. If you're
connected to the Headphone Jack of your external device, then you
may need to adjust both the volume control of your external device and
the volume control of this unit to find the most desirable volume setting.
(2) Slide the Power ON/OFF switch to OFF position to turn off the unit
when you finish listening.