Irradio RF-42UC, User Manual

Page: 23 / 26

22
4. Press and hold / button for searching radio frequency
automatically.
Notes:
-Manual tune to select weaker stations that might be by s kipped during
automatic tuning.
-If the automatic tuning does not stop on the exact frequency of the
station, for example, it stops on 100.8MHz instead of 100.6MHz, use
the manual tuning method to fine tune to the exact frequency of the
desired station.
Radio Preset Stations
The unit allows you to store up to 30 FM stations for easy recall at any
time.
Preset Stations
1.Tune to the radio station you want to store in memory by using
or button.
2.Press RPT/MEM button, the memory channel number “P01” will show
on the display, meanwhile, the Radio icon “FM” flashes simultaneously
3.Press
/ button to select the channel number you desire to
set.
4.Press MEMORY button again to confirm the preset location
.
5.Repeat steps 2-4 to store other stations if necessary.
Recalling Stored Preset Stations
1.Press PRESET button on the unit during Radio mode to enter the
radio memory selecting mode.
2.Press
/ button to select the preset channel
USB/SD OPERATION
1. Slide the Power ON/OFF switch to ON position to turn on the unit.
2. Connect your USB device or SD/MMC card to the unit to access
“USB” or “CARD” mode, the relevant “USB” or “CARD” icon appears on
the display. The USB or SD/MMC card will start playing automatically
once the contents scanning is finished.
-Press “PLAY/PAUSE” button to pause or resume playback.