6
LISTENING TO iPod/iPhone
CONNECTING
1.) Use the adapter included with your iPod and insert it into the docking area. No adaptor is required
if you use an iPhone. Your iPod / iPhone can now be inserted into t he docking port by placing the
connector on the bottom of the iPod onto the connector in the docking bay.
Note:
Please be careful when placing the iPod / iPho ne into the docking bay to avoid damaging the
30-pin connector on the iPod/iPhone or on the docking system.
2.) Press the POWER ON/STANDBY
button
on the docking base or press and hold it on the
remote control to turn on the unit.
3.) The iPod/iPhone will start playing automatically and start charging immediately. You can also start
playing the iPod/iPhone by tapping the iPod/iPhone
PLAY/PAUSE
button when the unit is in a
different mode.
4.) Tap the iPod/iPhone
PLAY/PAUSE
button to pause or resume iPod playback.
5.)
Adjust the sound level by pressing the /-
buttons
. You should now be able to take the
speakers freely from room to room without interruption (Operating distance is subject to your
surroundings and interior walls. Up to 100 foot range in open/ unobstructed areas without any
surrounding interference).
Note:
The volume lev el cannot be adjusted using th e volume control on your iPod/iPhone after
being docked.
6.) The iPod/iPhone will charge in all modes including during playback.
iPod/iPhone playback control:
Tap the iPod/iPhone
PLAY/PAUSE
button to pause or resume the iPod/iPhone playback;
Press the
SKIP
or
buttons to skip to the next or previous song;
Press and hold the
SKIP
or
buttons for fast-forwarding or fast-rewinding during playback.
Press and hold the PLAY/PAUSE
/
M
button for 3 seconds to control iPod / iPhone screen
menu.
Tap the ENTER button to enter iPod/iPhone menu selection.
Press the
/
buttons to scroll iPod/iPhone menu up/down
Note:
