5
CAUTION:
Danger of explosion if the battery is replaced incorrectly. Replace only with the same type
battery.
3.) Insert the battery holder back into the battery slot.
NOTE:
Only use a well-known brand of cell battery to ensure the longest life and best performance.
GETTING START
Note:
Before first use, please charge the satellite speakers for at least
12 hours
because the batteries
may not fully charged, even though the LED lights.
You must follow the
“Linking”
process below to link the transmitter with satellite speakers prior using
this wireless music system.
1. Plug the USB Transmitter into the USB port of the docking base.
2. Press the POWER ON/STANDBY
button
on the docking base or press and hold it on the remote
control to turn on Docking Base, the Power LED indicator will change from red to blue.
3. Turn the left satellite speaker power to ON and switch the speaker channel setting to “Left”, the
speaker status LED will be flashing blue.
4. Press and hold the Link button located on the back of the speaker box for about 3 seconds and then
release it. The speaker status LED will rapidly flash blue.
5. Now press the link button on the USB transmitter for 3 seconds, and then release it. The LED on the
Transmitter rapidly flashes red during the linking process between the transmitter and the speaker.
6. When the speaker and transmitter successfully link, the LED on the speaker will light solid blue and
the LED on the transmitter will slowly flash red. The transmitter LED will light solid red when music is
transmitting from the docking base or from your computer.
7. Turn the right satellite speaker power to ON and switch the speaker channel setting to “Right”.
Repeat above step 3 - 6 to link the right speaker with the transmitter.
8. When both speakers are successfully linked, you will be able to hear the sound coming from the
speakers when playing music.
Note:
If you activate the linking process, a beeping tone will come out from the speaker for about 15
seconds after you press and hold the link button of the speaker. A continue tone will be heard if
you and then press and hold the link button of the transmitter within this period.
