CDMP-327U
INSTRUCTION MANUAL
PORTABLE CD/MP3/USB RADIO CASSETTE RECORDER
ENG-1
SAFETY PRECAUTIONS
RIS K OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO MINIMISE THE RISK OF ELECTRIC
SHOCK, NEVER REMOVE THE COVER. THIS PRODUCT
CONTAINS NO USER-SERVICEABLE PARTS. ONLY
QUALIFIED REPAIR TECHNICIANS SHOULD WORK ON
THIS EQUIPMENTS.
HARZARD WARNING
Read this instruction and safety manual carefully before use. Keep this manual in a safe place for
further reference.
WARNINGS
To reduce the risk of fire or electric shock, do not expose this
product to rain or moisture.
The lightning symbol inside an equilateral triangle
warns the user of the presence inside the product of
uninsulated hazardous electric voltages powerful
enough to represent an electrocution risk.
The exclamation mark symbol inside an equilateral
triangle warns the user that important operating and
servicing (troubleshooting) instructions are contained
in the documentation accompanying the product.
CLASS 1 LASER PRODUCT
APPAREIL À LASER DE CLASSE1
PRODUIT LASER DE CLASSE1
CAUTIONS
I N V I S I B L E L A S E R R A D I AT I O N
WHEN OPEN AND INTERLOCKS
DEFEATED. AVOID EXPOSURE
TO BEAM.
To ensure safe use of this product, please follow the
advice below:
Positioning
Power supply
Safety instructions
• Do not use the product in extremely hot, cold,
dusty or damp condition.
• Place the product on a smooth, flat surface.
• Do not obstruct the flow of air through the
product. Place it on a well-ventilated position; do
not cover with fabric or stand on a rug or carpet.
• Before using this product, check that its rated
voltage matches your mains power supply
voltage.
• Never pull on the power cord when plugging in or
un-plugging the product: always use the plug
pulling the cord could damage it and create a risk
of electric shock.
• Unplug the product from the mains socket if you do
not intend to use it for an extended period.
• The On/Off button does not isolate the product
from the power supply. To disconnect the product
from the mains power supply, you must unplug
the power cord.
• This product should only be used in a horizontal
position.
EXPLANATION OF GRAPHIC SYMOBOLS.
HAZARD WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
CLASS 1 LASER PRODUCT
This product contains a low-power emitter.
PRECAUTIONS FOR USE
Condensation
In the event of a problem, unplug the power cord
and contact a qualified repair technician.
Ventilation precautions
Warning concerning liquids
Do not allow liquids to splash or spill onto the
product, and never stand a liquid-filled container
(vase, jar, etc.)on the top of it.
Warning concerning excessive sound levels
• Water droplets or condensation may from inside it
is moved into a very warm, humid atmosphere.
• C o n d e n s a t i o n c a n c a u s e t h e p r o d u c t t o
malfunction.
• Leave the set in a warm room for 1 to 2 hours to
allow the condensation to evaporate.
Never obstruct the product’s ventilation holes.
• Owing to this product’s extremely low noise output
and extended dynamic range, the user may be
tempted to turn up the volume louder than
necessary. The sound output may be excessively
high, to the point of damaging the product’s
headphones or loudspeaker. Always keep the
volume within reasonable limits.
Owner’s record
For your convenience, record the model number and serial number for future reference.
Model :_____________________________Serial number :_____________________________
