Note:
- Every change of minute digit will automatically reset the seconds to zero.
6. The word “On” will now appear and flash on the clock time place. This means that
the DCF reception is turned on. Press [▲] or [▼] to toggle DCF reception to OFF
or ON. Press [MENU/SETUP] to confirm.
Note:
- When DCF reception is turned ON, the time will be updated once the time
signal is received
- Once DCF reception is set to OFF or the time is set manually, the RCC time
indicator icon will disappear
- If no key press during setting mode for 10 seconds, it will automatically save
the setting value and exit to normal display.
TO SET DAILY ALARM
1. In clock time display mode, press [ ] button once to switch to display alarm time
for 10 seconds.
2. Press [ ] button again in alarm display mode to enable or disable the daily alarm.
3. In alarm time display mode, press and hold [ ] button for 2 seconds to enter
alarm setting mode.
4. The hour digits will flash, use [▲] button to increase by one hour or [▼] button to
decrease by one hour to your desired hours. Holding down the button will change
the increment/decrement unit rapidly. Press [ ] button to confirm.
5. The minute digits will flash. Use [▲] button to increase by one minute or [▼] but
-
ton to decrease by one minute to your desired minutes. Holding down the button
will change the increment/decrement unit rapidly. Press [ ] button to confirm and
finish the setting. The unit will show the alarm time for 10 seconds and auto-exit
to clock time display. The alarm bell icon [ ] will appear in clock time display to
indicate the daily alarm is enabled.
TO ACITVATE THE SNOOZE FUNCTION
In the top middle of the weather station, there is an IR motion sensor which can acti
-
vate snooze function. When the alarm sounds, move your hand above the IR motion
sensor within the distance of 15cm to pause alarm and activate snooze function. The
alarm bell icon [ ] will keep flashing during 5 minute snooze time. Press any key to
exit snooze.
~ 27 ~
(ENG)
