#18
NOTE:
Slide Doors toward back
before installing screws.
Attach the Doors using 5/8" Panhead
Screws (H7) through the slotted
holes of the Flipper Hinge Slides into
the pre-drilled holes in the underside
of the Top (C).
NOTE:
Install the screws into the
center of the slotted hole.
Check the Doors for side-to-side alignment.
There should be approximately 1/8" space
between each door and each side, and
between both doors. If adjustment is
necessary, slightly loosen screws, reposition
the doors and retighten the screws.
#19
When the Doors are correctly
aligned, secure Hinge in place with
four additional
5/8" Panhead
Screws in the indicated holes.
#20
#21
Your Desk Hutch is now completely
assembled and ready for use.
IMPORTANT!
H7
H7
H7
H7
H7
H7
