Place the Shelf (E) as
shown on a clean, carpeted
surface. Insert eight Minifix
Cams (H1) into the Shelf (E)
with the arrows of the cams
facing out.
#1
Insert eight Dowels (H2) into pre-drilled
holes of Facia Strip (F). Apply a small
amount of Glue (H5) onto the dowels of
the Facia Strip (F). Position the Facia
Strip (F) into the corresponding holes in
the Shelf (E) and press firmly into place.
Wipe away any excess glue with a damp
cloth. Set aside to dry.
NOTE:
Use ten Dowels (H2) for
the MH72.
#2
The MH60 and MH72 are slightly different, but assemble
in the same way. The MH60 is shown here.
ASSEMBLED
DISASSEMBLED
Using the Minifix System:
Insert the Minifix Cams into the
appropriate holes with the arrow
facing outwards as shown.
Using the #2 Phillips screwdriver,
rotate the Cam Devices a half turn
clockwise until snug.
To disassemble, turn the Cam
Devices counter-clockwise and
remove panels.
When screwing post into hole,
Do
Not
over tighten. Screw post down
until bottom face of post flange just
touches board surface.
H5
