#3
#4
#5
H6
H7
Screw four Minifix Bolts (H6) into the Right Side
Panel (B) where indicated.
Insert two Dowels (H7) into the Side Panel (B)
where indicated.
Screw one Rafix Bolt (H8) into the Side Panel
(B)where indicated.
H8
Install Leveler Inserts (H3) into the bottom holes of the
Right Side panel (B) and the Divider Panel (F). Tap the
Inserts with a plastic mallet until flush with the surface.
Press a Leveler Bracket (H4) over each Leveler Insert.
Screw the Levelers (H5) into the Leveler Inserts.
Adjust the Levelers after assembly is complete.
Insert eight Rafix Cams (H2) into the Top (C) with the flat edge of the cams aligned with
the edge of the panel.
Insert four Rafix Cams into the Shelf (E) with the flat edge of the cams aligned with the
edge of the panel.
Carry out the following three steps (4, 5 & 6) if it
was not performed during assembly of the Base
Carrel unit (LC36).
