Ironton 61476, Owner'S Manual, Page: 9 / 16

Page 9 of 16
Main Parts of Rotary Tool Kit
Reference Subassembly
1 Spring Chuck
2 Securing Ring
3 Spindle Lock
4 Carbon Brush Cap
5 Speed Dial
6 On/Off Switch
7 Manual Stand
Before Each Use
⚠
WARNING

Always remove the plug from the power source before installing.

Verify the chuck is tight.

Make sure workpiece is properly secured.

Always check for damaged or worn out parts before using the rotary tool. Broken parts will affect
the rotary tool operation. Replace or repair damaged or worn parts immediately.
Operating Instructions
⚠
WARNING

To reduce the risk of injury, user must read this manual.

To reduce the risk of injury, always wear eye protection.

To reduce the risk of injury, use only accessories rated at least equal to the maximum speed
marked on the tool.

To reduce the risk of injury, always use proper guards when grinding.

Hold power tools by insulated gripping surfaces, when performing an operation where the cutting
tool may contact hidden wiring or its own cord.

Do not modify the tool in any way. Unauthorized modification may impair the function and/or safety
and could affect the life of the equipment. Never change the position of the forward/reverse switch
while the chuck is turning.