Page 6 of 16
⚠
CAUTION
ROTARY TOOL KIT USE AND CARE
Do not force the rotary tool. Products are safer and do a better job when used in the manner for
which they are designed. Plan your work, and use the correct product for the job.
Check for damaged parts before each use. Carefully check that the product will operate properly
and perform its intended function. Replace damaged or worn parts immediately. Never operate the
product with a damaged part.
Do not use a product with a malfunctioning switch. Any power tool that cannot be controlled with
the power switch is dangerous and must be repaired by an authorized service representative
before using.
Disconnect the power/air supply from the product and place the switch in the locked or off position
before making any adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
Store the rotary tool kit when it is not in use. Store it in a dry, secure place out of the reach of
children. Inspect the tool for good working condition prior to storage and before re-use.
Use only accessories that are recommended by the manufacturer for use with your product.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
Keep guards in place and in working order. Never operate the product without the guards in place.
Do not leave the tool running unattended.
Specific Operation Warnings
⚠
WARNING
To reduce the risk of injury, user must read this manual.
To reduce the risk of injury, always wear eye protection.
To reduce the risk of injury, use only accessories rated at least equal to the maximum speed
marked on the tool.
To reduce the risk of injury, always use proper guards when grinding.
Hold power tools by insulated gripping surfaces, when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
Do not modify the rotary tool in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the equipment.
Grounding
⚠
WARNING
This machine must be grounded while in use to protect the operator from electrical shock. This