Page 11 of 18
d. Plug in the sharpener and turn it on.
e. Allow the sharpener to come up to full speed.
f. Squeeze the vise handle and pull down on the handle until the grinding wheel makes contact
with and sharpens the cutting edge.
g. Turn the chain roller until the next cutter is in position. Turn the sharpener on and sharpen the
cutter.
h. Continue until all of the cutters have been sharpened.
i. Turn off the sharpener and unplug it.
6. Sharpening the left-hand cutters (leave the chain in the vise):
a. Loosen the angle adjustment knob, align the angle arrow to the correct angle to the right of 0 on
the miter gauge, and then tighten the angle adjustment knob.
b. Turn the chain roller until the first left-hand cutter is in position. Then, engage the chain stop.
c. Follow instructions for 5. Sharpen the right-hand cutters: beginning at c. and ending at i.
7. Clean and oil the chain before reinstalling it on the chainsaw.
8. To prevent accidents, turn off the tool and unplug the tool from its electrical outlet after use. Clean
and
then store the tool indoors out of children’s reach.
Replace the Grinding Wheel
1. Remove grinding wheel cover.
2. Remove the outer flange by turning it counterclockwise, and then remove the grinding wheel.
Summary of Contents for 57520
Page 14: ...Page 14 of 18 Parts Diagram ...