Page of 12
9
they were removed.
4. To replace a carbon brush (42), insert it into the brush holder (41) carbon end first, with the
spring end to the outside. Replace the brush cap (43) and tighten it by turning clock wise.
NOTE: When replacing carbon brushes (42) do not replace only one brush. Always replace
both carbon brushes at the same time.
5. After replacing the carbon brushes (42), let the tool run for 2 minutes before using it. This will
allow the carbon brushes (42) to wear into the armature.
Caution: During use, do not obstruct the motor vents in the Cover (48). Obstruction may
cause the motor to overheat during use, possibly damaging the tool.
