Ironside 152300, Manual

Page: 9 / 116

9
Working in Automatic mode (self-leveling):
The laser level can project a horizontal line, vertical line or both
simultaneously.
1. Remove the laser from the case and place it on a flat, vibration free
surface or tripod.
2. Turn ON/OFF switch to ON.
The laser level will generate the crossed horizontal and vertical lines
and the laser beam indicator will light.
3. Choose the beams you want to use by pushing the Beam Selector.
4. Before moving the laser level be sure to switch to laser to the OFF
position which engages the lock protect mechanism.
Operating instructions