Step 3:
Assemble TOP SHELF onto PRO Stand Frame. Using
4x TOP SHELF M8x 20mm Bolts and 4x 8mm Washers,
secure the TOP SHELF on four corners but DO NOT
TIGHTEN. Next, repeat Step 1 and secure TOP SHELF
Bracket to PRO STAND SIDES using 4x M8 x 65mm
bolts, 8x M8 Washers and 4x Nylock Nuts. Note you may
have to push down slightly in middle for TOP SHELF
BRACKET and PRO STAND SIDE holes to align proper-
ly. Once Assembly is complete, tighten all bolts.
Rubber leveling feet
Step 4:
Turn Completed PRO STAND upside down to install 8x CASTER AXLE SPACERS and
CASTERS. Note 2x CASTERS have foot locking lever. Slide AXLE SPACER onto each CAST-
ER and then thread Casters into 4 corners of PRO STAND SIDES.
Choose your preferred PRO STAND height
by the number of AXLE SPACERS you install on
each CASTER AXLE. Total height adjustability is 2inches or 50mm. Each Spacer is 1 inch/25mm
in length. Finally, tighten CASTER LOCKING NUT with 19mm wrench.
AXLE SPACER
1 inch/25mm
CASTER LOCKING
NUT
Adjust height of stand by up to
2 inches/50mm using spacers
