Page 6 of 8
SS075
Installation Guide
©Copyright 2022 Ironman 4x4 Pty Ltd. No part of this publication may be reproduced or replicated without the prior written consent of Ironman 4x4 Pty Ltd
9.
Using 2 x bolt plates, slide up into
the factory chassis holes and hold
into place with plastic holders.
10.
Now move the rear. Locate the 2 x
rear factory chassis holes, feed the
bolt plate into place, and hold bolt
plate in place with plastic holder.
It is advised to use a jack or jack
stands to support the steps.
With the help of another person,
carefully lift the step into position,
ensuring that the rear of the step is
supported and align with the front and
middle bolts. Then attached the centre
bolts and move to the front and the
rear, leave loose and don’t fully tighten
at this stage.
