Page 5 of 8
SS075
Installation Guide
©Copyright 2022 Ironman 4x4 Pty Ltd. No part of this publication may be reproduced or replicated without the prior written consent of Ironman 4x4 Pty Ltd
5.
Start on the right-hand side of the
vehicle. Locate the two holes on
the front of the side of the chassis
rail and the hole directly under the
chassis rail. Feed the wire into the
chassis and pull through the lower
chassis hole on the underside of
the rail, once in the factory chassis
hole, hold into place with plastic
holders.
6.
Now Hook the U-bolt through both
holes and hold in place with 2 x
plastic holders.
NOTE:
the longer threaded end goes
to the top.
7.
Move to the middle of the car,
in-between both front doors.
Locate the 2 x oval holes and the
hole directly under the chassis rail.
8.
Feed the spring wire into one of
the chassis holes and pull through
the lower chassis hole, once the
bolt plate is in the lower chassis
hole, hold into place with plastic
holders.
