Ironman4x4 Monster Winch, User Manual

Page: 9 / 16

INST
ALLA
TION
IMPORTANT:
฀฀Before฀winch฀is฀installed฀to฀winch฀cradle,฀the฀clutch฀handle฀might฀need
to฀be฀rotated฀to฀a฀more฀convenient฀position฀for฀access฀through฀bull฀bar.฀To฀do฀this,฀
refer to the following steps.
1. Stand winch vertically on motor with gearbox
facing upwards.
฀ ฀NOTE:฀If฀shaft฀comes฀out฀of฀cable฀drum฀
remove it from the gearbox and place it back
into the drum making sure it engages with
the brake.
฀ ฀NOTE:฀Also฀make฀sure฀that฀the฀drum฀support฀
bush remains in the end of the drum support
housing with the locating tang in the correct
position.
4.฀ ฀Undo฀and฀remove฀10฀Allen฀head฀bolts฀that฀
hold the gearbox housing to the drum support
housing and rotate the drum support housing
to the desired location. Make sure the
gearbox gasket does not tear.
5.฀ Re-install฀10฀bolts฀and฀tighten฀firmly.
฀ NOTE:฀Take฀care฀not฀to฀over-tighten.
2.฀ ฀Undo฀and฀remove฀2฀chrome฀Allen฀head฀bolts฀
which hold the gearbox to the tie rods.
3. Lift gearbox off winch.
FITTING YOUR
MONSTER WINCH MONSTER WINCH
FITTING YOUR
6.฀ ฀Refit฀gearbox฀to฀winch,฀refit฀and฀tighten฀Allen฀
head bolts into tie rods.
17