Page 7 of 11
2. Bolt winch to cradle with gearbox to the left hand
side of vehicle and cable spooling from bottom of
the cable drum using bolts and washers provided.
3. Bolt fairlead to recess in front of bull bar using
bolts, washers and nuts provided.
4. Fit bull bar to vehicle referring to steps 12 - 17 of
bull bar fitting instructions.
5. Mount control box in desired location.
Winch Installation
1. Before winch can be installed a section of the
bumper bar will need to be removed. To do
this, place winch on mounting cradle and mark
bumper bar as shown.
