Page 5 of 11
16. Align bull bar with vehicle and tighten all bolts.
17. Once bull bar is aligned with vehicle and
tightened, drill through pinning holes (circled in
red) between bull bar and chassis bracket and
secure with bolts, washers and nuts provided.
18. Connect park lights, indicators and fog lights
as per wiring diagrams at the back of fitting
instruction manual.
15. Fit bull bar to chassis brackets using M12 bolts,
flat washers, spring washers and nuts provided.
14. Unwrap bull bar. Check over riders and light
assemblies are tight in bull bar before installation.
