13
Remove four M4x20 Screws (74) from
both Rear Rod (5) and Heel Holder
Frame (12).
Attach one Heel Holder (48) to one end
of the Rear Rod (5). Slide the Rear
Rod (5) through the large round hole
on the side of Boom (4) as shown, and
attach the other Heel Holder (48) to the
other end of the Rear Rod (5).
Secure both Heel Holders (48) on the
Rear Rod (5) with two M4x20 Screws
(74) that were removed.
Slide the In-Step Frame (6) into the
bottom of the Boom (4) and align one
of the holes on the In-Step Frame (6)
with one hole on the bottom of the
Boom (4). Secure the In-Step Frame (6) in place using one M8x45 Hex Head Bolt
(67), Ø8.5xØ20xt1.5 Washer (84), and M8 Lock Nut (79).
Attach the Heel Holder Frame (12) to the Boom (4) by inserting the Heel Holder
Frame (12) into the square bracket on the boom. Slide the Heel Holder Frame (12)
completely into the square bracket and secure it with a M6x40 Hex Head Bolt (66)
and M6 Lock Nut (80). Finally, secure both Heel Holders (48) on the Heel Holder
Frame (12) with two M4x20 Screws (74) that were removed.
Attach the Headrest (13) onto the Bed
Frame (17) with one M8x40 Allen Head
Bolt (64), two M8x20 Allen Head Bolts
(58), and three Ø8.5xØ20xt1.5
Washers (black) (85).
Insert the Velcro strap from the Foam
Bed (14) to the underneath of Lumbar
Pad (23) and secure the Lumbar Pad
(23) onto the Foam Bed (14).
7
ASSEMBLY
8
Summary of Contents for LXT 850
Page 3: ...3 WARNING LABEL PLACEMENT ...
Page 7: ...7 OVERVIEW DRAWING ...
