TROUBLESHOOTING
Computer not working correctly
Check to make sure the computer cable is connected securely.
The bike trainer wobbles or shakes when in use
Turn the
adjustable leveler
on the front stabilizer or rear stabilizer as needed to
level the bike trainer.
Squeaking noise when in use
The bolts may be loose on the bike trainer. Inspect all bolts and tighten as needed.
No readings or inconsistent/erratic heart rate readings
Before wearing, try adding a few drops of water to the sensor strips of the chest belt.
MAINTENANCE
Cleaning
The bike trainer can be cleaned with a soft cloth and mild detergent. Do not use
abrasives or solvents on plastic parts. Please wipe your perspiration off the bike
trainer after each use. Be careful not to get excessive moisture on the computer
display panel as this might cause an electrical hazard or electronics to fail. Please
keep the bike trainer, especially the computer console, out of direct sunlight to
prevent screen damage or premature wear. Please inspect all assembly bolts and
pedals on the machine for proper tightness every week.
Storage
Store the bike trainer in a clean and dry environment away from children.
Thread sealant instruction
If any parts need to be applied thread sealant, the parts must be cleaned before
applying. It needs at least 12 hours to a day to wait the sealant dry, do not
use the bike until the thread sealant is fully dry.
TROUBLE SHOOT & MAINTENANCE
20
