Ironman Fitness ENVY, Owner'S Manual

Page: 21 / 44

www.ironmanfitness.com
Important Information 21
2. Press PoWER button. There will be an eight (8) second delay before data can be entered.
3. There are thirteen (13) programs. Refer to next page for a program overview that includes Speed and Incline setting for each program. Press
the PRoGRAM UP or DoWN button to select which program you wish to use. Press ENTER PRoGRAM.
4. Press START/SToP button. Belt will begin to move after 4 seconds. Step on belt slowly after the belt starts moving.
COOL DOWN
At the end of the program, the unit will enter a Cool Down program with a fixed time of 2 minutes. At this time, the TIME window will continue to
show the entered Time. The Speed and Incline will go to 1/2 of their current settings. For example, If you are running at 5 MPH with an Incline of
4%, when the unit goes into Cool Down, Speed will decrease to 2.5 MPH and the Incline will decrease to 2%. After the 2 minute Cool Down, the
unit will self power down.
NOTE: If any button is pressed during the 2 minute Cool Down period, the unit will change to Manual Mode (see P1). At this time, full manual con-
trol of treadmill settings such as Speed and Incline are available to the User.
TIME GOAL (P2):
Program allows user to set desired TIME of workout. once the desired TIME is accomplished, the treadmill will enter Cool Down.
1. Press PRoGRAM UP button or PRoGRAM DoWN button until P2 is selected. Press ENTER. The TIME window will blink. Use the SPEED +
or – arrows or toggles to select your workout time. Press ENTER.
2. The SPEED window will then blink. Use the SPEED + or – arrows or toggle to select the speed for your workout. Press ENTER.
3. The INClINE window will then blink. Use the I or – arrows or incline toggles to set your workout incline. Press ENTER.
4. To start, press the START/SToP button.
DISTANCE GOAL (P3):
Program will allow user to set desired DISTANCE for workout. Distance will count up to desired Distance. once the desired DISTANCE is accom-
plished, the treadmill will enter Cool Down.
1. Press PRoGRAM UP button or PRoGRAM DoWN button until P3 is selected. Press ENTER. The DISTANCE/CAloRIE window will blink.
Use the SPEED + or – arrows or toggles to select your workout distance. Press ENTER.
2. The SPEED window will then blink. Use the SPEED + or – arrows or toggle to select the speed for your workout. Press ENTER.
3. The INClINE window will then blink. Use the I or – arrows or incline toggles to set your workout incline. Press ENTER.
4. To start, press the START/SToP button.
CALORIES GOAL (P4):
Program allows user to set desired CAloRIES of workout. once the desired CAloRIES is accomplished, the treadmill will enter Cool Down.
1. Press PRoGRAM UP button or PRoGRAM DoWN button until P4 is selected. Press ENTER. The DISTANCE/CAloRIES window will blink.
Use the SPEED + or – arrows or toggles to select your workout CAloRIES. Press ENTER.
2. The SPEED window will then blink. Use the SPEED + or – arrows or toggle to select the speed for your workout. Press ENTER.
3. The INClINE window will then blink. Use the I or – arrows or incline toggles to set your workout incline. Press ENTER.
4. To start, press the START/SToP button.
Console Instruction