Ironman Fitness ATIS 1000, Owner'S Manual

Page: 10 / 18

Assemble In Step Frame in the middle hole.
You can adjust to bottom or top hole later so the
Ankle Pads can secure onto the smallest part of
your ankles.
5 6
7
4
ASSEMBLY
61 Washer
67 Nylon Nut
6 Headrest
(6 Adjustable Holes)
8 Rear Rod
50 Screw
46 Bolt
12 In Step Frame
66 Nylon Nut
61 Washer
60 Washer
51 Hex Head Bolt
68 Hex Head Bolt
10
Remove the 17 Square End Cap on the back of
square bracket of 9 Heel Holder Frame. There is a
rope which is tied at the bottom of 85 Spring inside
the 9 Heel Holder Frame. Insert the rope with 85
Spring through into the square bracket on the 3
Boom and pull it out from the other end of the
square bracket of the 3 Boom. Slide the 9 Heel
Holder Frame completely into the square bracket,
insert the 68 Hex Head Bolt with a 60 Washer
halfway through the square bracket, slide the 68
Hex Head Bolt through the ring at the bottom of the
85 Spring, slide the bolt through the rest of the
square bracket, and secure at the other end with a
60 Washer and 67 Nylon Nut. Now you can
remove the rope from the bottom of the 85 Spring.
Finally, attach the 17 Square End Cap onto the
back of square bracket of 9 Heel Holder Frame that
was removed.
17 Square
End Cap
3 Boom
9 Heel Holder Frame