Ironman Fitness 6102, Owner'S Manual

Page: 13 / 31

A
c
B
2. Seat Post and Seat Installation
2.1 Seat Post Installation
Turn the Round Knob (E-3) on the Main Frame (E-1) in a counterclockwise direction until it can be
pulled back. Pull back the Round Knob (E-3) and then insert the Seat Post (D-1) into the tube of
the Main Frame (E-1). Slide the Seat Post (D-1) up or down to the desired position ( see
diagram A). Lock the Seat Post (D-1) in place by releasing the Round Knob (E-3) and sliding the
Seat Post (D-1) up or down slightly until the Round Knob (E-3) "pops" down into the locked
position.
Fully tighten
the Round Knob (E-3) in a clockwise direction.
WARNING: When adjusting the height of seat post, the MAX line cannot be higher than
the edge of the plastic bushing.
2.2 Seat Installation
Attach Seat (L-1) onto the Seat adjustment set (L) and tighten nuts with the Open wrench
14,15mm provided (see diagram C), then slide the Seat backward and forward ( see diagram B. )
to a suitable position. Turn the Knob (D-4) clockwise to tighten.
11
ASSEMBLY
Tool:
Open Wrench 14,15 mm 1PC