8
9
6.
Connect the computer cable at the top of the console
tube (2) to the console (5). Feed the pulse wires from
the console (5) down into the console tube (2) and out
the rear hole in the handlebar area. Attach the console
tube (2) to the console (5) with the screws (59) already
attached to back of the console (5). Attach bottle rack
to console tube (2).
6
7.
Attach the pulse wires in the front handlebar (23) to the
wires from the console (5). Connect the front handlebar
(23) to the console tube with the locknuts (49), flat
washers (50) and screws (55) provided.
Make sure not
to “pinch” any of the pulse wires when connecting
the handlebar to the console tube.
7